强脉冲电磁力驱动的冲击载荷

冲击载荷在材料科学与工程领域具有一定的应用。随着研究的深入, 对冲击速度、冲击能量提出了更高的需求, 是落锤所无法达到的。强脉冲磁场可由脉冲大电流产生, 通过合适的装置可产生强脉冲电磁力, 进而可转换为冲击载荷。通过数值模拟, 给出了强脉冲磁场、电磁力及冲头运动过程的数值模拟结果。采用高速摄像对该压缩冲击装置的运动过程进行记录, 通过对影像数据处理获得了冲击速度及冲击能量, 验证了模拟结果。     

弹体高速侵彻效率的实验和量纲分析

为了研究高速侵彻时弹体撞击速度、材料强度等对质量侵蚀特性和侵彻效率的影响规律,开展了不同材料强度和长径比的弹体高速侵彻半无限厚素混凝土靶实验,弹体撞击速度为880~1 900 m/s,弹头形状为尖卵型(半径口径比为3),口径为30 mm。由实验发现:弹体撞击速度对侵彻效率的影响呈抛物线分布,最大侵彻效率时的弹体特征撞击速度约1 400 m/s;高速侵彻时弹体的质量侵蚀主要发生在卵形头部,弹身及尾部损伤极少;速度超过特征撞击速度时,弹体侵蚀严重,甚至弯曲变形或解体;弹体强度提高至约2倍时,质量侵蚀率降低约80%。基于实验,利用量纲分析原则建立了量纲一侵彻效率和量纲一弹体撞击速度的函数关系式,可估算出最大侵彻效率对应的弹体撞靶速度,为高速侵彻效应模拟实验提供理论指导。     

Time-resolved measurement technique for pulsed electron beam envelope basing on framing and streaking principle

The time-resolved electron beam envelope parameters, including cross sectional distribution and beam centroid position, are very important for the study of beam transmission characteristics in a magnetic field and for verifying the rationality of the magnetic field parameters employed. One kind of high time-resolved beam envelope measurement system has recently been developed, constituted of a high-speed framing camera and a streak camera.It can obtain three panoramic images of the beam and time continuous information along the given beam profile simultaneously. Recently obtained data has proved that several fast vibrations of the beam envelope along the diameter direction occur during the front and the tail parts of the electron beam. The vibration period is several nanoseconds. The effect of magnetic field on the electron beam is also observed and verified. Beam debugging experiments have proved that the existing beam transmission design is reasonable and viable. This beam envelope measurement system will establish a good foundation for beam physics research.     

工艺参数对高铁轴承外圈端面成形质量的影响

为了实现高铁轴承外圈的精确成形, 应用ABAQUS有限元软件, 对不同工艺参数下的冷辗扩轧制过程进行了有限元模拟, 得到了工艺参数对高铁轴承外圈成形质量的影响规律为: 较大的驱动辊转速和芯辊直线进给速度有利于坯料上端面的成形, 较小的轧制比获得的坯料上端面成形质量较好.     

Acoustic power dependences of sonoluminescence and bubble dynamics

The decreasing effect of sonoluminescence (SL) in water at high acoustic powers was investigated in relation to bubble dynamics and acoustic emission spectra. The intensity of SL was measured in the power range of 1–18 W at 83.8 kHz for open-end (free liquid surface and film-covered surface) and fixed-end boundaries of sound fields. The power dependence of the SL intensity showed a maximum and then decrease to zero for all the boundaries. Similar results were obtained for sonochemiluminescence in luminol solution. The power dependence of the SL intensity was strongly correlated with the bubble dynamics captured by high-speed photography at 64 k fps. In the low-power range where the SL intensity increases, bubble streamers were observed and the population of streaming bubbles increased with the power. At powers after SL maximum occurred, bubble clusters came into existence. Upon complete SL reduction, only bubble clusters were observed. The subharmonic in the acoustic emission spectra increased markedly in the region where bubble clusters were observed. Nonspherical oscillations of clustering bubbles may make a major contribution to the subharmonic.     

Depth information extraction with an aperture-rotating camera

This paper focuses on extracting depth information with an aperture-rotating camera. Compared with previous work, the proposed method is applicable for arbitrary rotation angle by making use of pixel registration to get pixel shift angle, and calculating the pixel shift along this angle. Besides, consumption time for shift angle is reduced by means of sampling. Compared with point-by-point method, the proposed method reduces the computation time from about 1 h to 1 min for a 15-megapixel image. Experimental results of a scene named “bottles” show that the depth value has a margin of error of 5%. Proposed method makes it possible to extract depth information with a single camera and expands the application of DSLR camera.     

非圆化磨耗激励下高速列车转向架区域噪声边频带产生机理及影响

该文通过对车辆噪声和车轮非圆化磨耗开展跟踪测试和分析,发现存在车轮非圆化磨耗的列车在运行过程中,其转向架区域噪声窄带频谱上会出现了以非圆化磨耗激励频率为中心,以过轨枕频率为间隔等间距分布的噪声峰值(即噪声边频带).这使得车轮非圆化磨耗不仅会影响其激励频率处的列车轨道结构的振动和噪声,还会对其他频段的噪声产生重要影响.为...     

Y型微通道两相流内部流动特性刘

利用显微粒子图像测速技术、高速度数码显微系统及数值模拟方法研究了Y 型微通道内液滴的形成. 主要考虑了Y 型角度（45°,90°,135°,180°）、两相流量大小等因素的影响. 发现在挤压机制中,Y 型微通道内分散相液滴的形成主要受到来自连续相的剪切作用,Y 型角度越小,分散相所受到的剪切作用越大. 在液滴生成过程中,连续相速度剖面呈非对称抛物线型分布. 当Y 型角度小于180°时,角度的变化对液滴直径大小影响较小,但角度的减小会加快液滴的生成时间. 当Y 型角度为180°时,生成的液滴体积最大且生成时间最长. 毛细数对液滴直径和生成时间的变化同时产生影响,连续相毛细数的增大使得连续相在两相交汇位置处对分散相的作用力更集中,导致分散相更易破裂.     

高速摄影在流体动力学不稳定性研究中的应用

用高速摄影技术研究了高压气体膨胀驱动空气-水界面的瑞利-泰勒不稳定性,获得了空气-水界面的不稳定性清晰图像,得到气炮尖顶运动速度及湍流混合层高度增长速度与时间关系曲线。在横式激波管上用高速纹影诊断技术研究了激波作用空气-SF6界面的里克特迈耶-梅什科夫不稳定性,初步获得了实验图像,可清晰显示混合区变化过程。     

门控型像增强器开门时间测量

提出了采用超快激光脉冲与光纤阵列形成的光延时、跟CCD相机相结合的方法,对门控型像增强器进行了开门时间的测量,分析了该测量方法的可行性,建立了门控型像增强器开门时间的测量系统。用该测量方法对超高速光电分幅相机中的门控型像增强器开门时间进行了测量,得到了10,20,30,50 ns档开门时间的实验图片,与所加的快高压脉冲时间12.50,18.50,28.75,48.60 ns相比较,开门时间的测量精度得到了提高,该测量方法可用于超高速光电分幅相机曝光时间的标定。